Hitachi Vantara Pentaho Community Forums
Results 1 to 5 of 5

Thread: [Mondrian] NativizeSetFunDefTest

  1. #1
    Julian Hyde Guest

    Default [Mondrian] NativizeSetFunDefTest

    Matt,

    I am investigating 2 errors and 1 failure from NativeSetFunDefTest that
    appear when aggregates tables are enabled
    (mondrian.rolap.aggregates.Use=true and
    mondrian.rolap.aggregates.Read=true). The exceptions occur on all databases
    (at least, oracle, mysql and derby).

    The exceptions were introduced by your change 13256 on //open/mondrian
    branch in December, and that branch and the mondrian-3.2 branch still fail
    with the same exceptions. Can you investigate please? Code freeze for 3.2.0
    is this week and it would be great if we can get the suite running 100%
    clean for aggregates by then.

    Julian

    _______________________________________________
    Mondrian mailing list
    Mondrian (AT) pentaho (DOT) org
    http://lists.pentaho.org/mailman/listinfo/mondrian

  2. #2
    Matt Campbell Guest

    Default [Mondrian] Re: NativizeSetFunDefTest

    We'll look into it and let you know.


    On 4/18/10, Julian Hyde <jhyde (AT) pentaho (DOT) com> wrote:
    > Matt,
    >
    > I am investigating 2 errors and 1 failure from NativeSetFunDefTest that
    > appear when aggregates tables are enabled
    > (mondrian.rolap.aggregates.Use=true and
    > mondrian.rolap.aggregates.Read=true). The exceptions occur on all databases
    > (at least, oracle, mysql and derby).
    >
    > The exceptions were introduced by your change 13256 on //open/mondrian
    > branch in December, and that branch and the mondrian-3.2 branch still fail
    > with the same exceptions. Can you investigate please? Code freeze for 3.2.0
    > is this week and it would be great if we can get the suite running 100%
    > clean for aggregates by then.
    >
    > Julian
    >

    _______________________________________________
    Mondrian mailing list
    Mondrian (AT) pentaho (DOT) org
    http://lists.pentaho.org/mailman/listinfo/mondrian

  3. #3
    Guest

    Default RE: [Mondrian] Re: NativizeSetFunDefTest

    I don't understand enough about how Aggregate tables work to figure this
    out. We didn't expect to support aggregate tables with NativizeSet, so
    I think the best we can do right now is only run the tests if those
    properties are false. I'll commit that change later today.

    Kurt

    -----Original Message-----
    From: mondrian-bounces (AT) pentaho (DOT) org [mailto:mondrian-bounces (AT) pentaho (DOT) org]
    On Behalf Of Matt Campbell
    Sent: Monday, April 19, 2010 6:03 PM
    To: jhyde (AT) pentaho (DOT) com; Mondrian developer mailing list
    Subject: [Mondrian] Re: NativizeSetFunDefTest

    We'll look into it and let you know.


    On 4/18/10, Julian Hyde <jhyde (AT) pentaho (DOT) com> wrote:
    > Matt,
    >
    > I am investigating 2 errors and 1 failure from NativeSetFunDefTest

    that
    > appear when aggregates tables are enabled
    > (mondrian.rolap.aggregates.Use=true and
    > mondrian.rolap.aggregates.Read=true). The exceptions occur on all

    databases
    > (at least, oracle, mysql and derby).
    >
    > The exceptions were introduced by your change 13256 on //open/mondrian
    > branch in December, and that branch and the mondrian-3.2 branch still

    fail
    > with the same exceptions. Can you investigate please? Code freeze for

    3.2.0
    > is this week and it would be great if we can get the suite running

    100%
    > clean for aggregates by then.
    >
    > Julian
    >

    _______________________________________________
    Mondrian mailing list
    Mondrian (AT) pentaho (DOT) org
    http://lists.pentaho.org/mailman/listinfo/mondrian

    _______________________________________________
    Mondrian mailing list
    Mondrian (AT) pentaho (DOT) org
    http://lists.pentaho.org/mailman/listinfo/mondrian

  4. #4
    Julian Hyde Guest

    Default RE: [Mondrian] Re: NativizeSetFunDefTest

    Two of those tests make mondrian return a NullPointerException. It is always
    a bug if mondrian does that. (I mean a bug in the mondrian, not in
    mondrian's test suite.) Can you find a way to disable nativizeSet if
    aggregate tables are enabled, or something like that?

    Julian

    > -----Original Message-----
    > From: Kurtis.Walker (AT) thomsonreuters (DOT) com
    > [mailto:Kurtis.Walker (AT) thomsonreuters (DOT) com]
    > Sent: Wednesday, April 21, 2010 5:43 AM
    > To: mondrian (AT) pentaho (DOT) org; jhyde (AT) pentaho (DOT) com
    > Subject: RE: [Mondrian] Re: NativizeSetFunDefTest
    >
    > I don't understand enough about how Aggregate tables work to
    > figure this
    > out. We didn't expect to support aggregate tables with
    > NativizeSet, so
    > I think the best we can do right now is only run the tests if those
    > properties are false. I'll commit that change later today.
    >
    > Kurt
    >
    > -----Original Message-----
    > From: mondrian-bounces (AT) pentaho (DOT) org
    > [mailto:mondrian-bounces (AT) pentaho (DOT) org]
    > On Behalf Of Matt Campbell
    > Sent: Monday, April 19, 2010 6:03 PM
    > To: jhyde (AT) pentaho (DOT) com; Mondrian developer mailing list
    > Subject: [Mondrian] Re: NativizeSetFunDefTest
    >
    > We'll look into it and let you know.
    >
    >
    > On 4/18/10, Julian Hyde <jhyde (AT) pentaho (DOT) com> wrote:
    > > Matt,
    > >
    > > I am investigating 2 errors and 1 failure from NativeSetFunDefTest

    > that
    > > appear when aggregates tables are enabled
    > > (mondrian.rolap.aggregates.Use=true and
    > > mondrian.rolap.aggregates.Read=true). The exceptions occur on all

    > databases
    > > (at least, oracle, mysql and derby).
    > >
    > > The exceptions were introduced by your change 13256 on

    > //open/mondrian
    > > branch in December, and that branch and the mondrian-3.2

    > branch still
    > fail
    > > with the same exceptions. Can you investigate please? Code

    > freeze for
    > 3.2.0
    > > is this week and it would be great if we can get the suite running

    > 100%
    > > clean for aggregates by then.
    > >
    > > Julian
    > >

    > _______________________________________________
    > Mondrian mailing list
    > Mondrian (AT) pentaho (DOT) org
    > http://lists.pentaho.org/mailman/listinfo/mondrian
    >
    >


    _______________________________________________
    Mondrian mailing list
    Mondrian (AT) pentaho (DOT) org
    http://lists.pentaho.org/mailman/listinfo/mondrian

  5. #5
    Guest

    Default RE: [Mondrian] Re: NativizeSetFunDefTest

    Sure, I can do that.

    -----Original Message-----
    From: Julian Hyde [mailto:jhyde (AT) pentaho (DOT) com]
    Sent: Wednesday, April 21, 2010 7:33 PM
    To: Walker, Kurtis (Hlthcr&Science); mondrian (AT) pentaho (DOT) org
    Subject: RE: [Mondrian] Re: NativizeSetFunDefTest

    Two of those tests make mondrian return a NullPointerException. It is
    always
    a bug if mondrian does that. (I mean a bug in the mondrian, not in
    mondrian's test suite.) Can you find a way to disable nativizeSet if
    aggregate tables are enabled, or something like that?

    Julian

    > -----Original Message-----
    > From: Kurtis.Walker (AT) thomsonreuters (DOT) com
    > [mailto:Kurtis.Walker (AT) thomsonreuters (DOT) com]
    > Sent: Wednesday, April 21, 2010 5:43 AM
    > To: mondrian (AT) pentaho (DOT) org; jhyde (AT) pentaho (DOT) com
    > Subject: RE: [Mondrian] Re: NativizeSetFunDefTest
    >
    > I don't understand enough about how Aggregate tables work to
    > figure this
    > out. We didn't expect to support aggregate tables with
    > NativizeSet, so
    > I think the best we can do right now is only run the tests if those
    > properties are false. I'll commit that change later today.
    >
    > Kurt
    >
    > -----Original Message-----
    > From: mondrian-bounces (AT) pentaho (DOT) org
    > [mailto:mondrian-bounces (AT) pentaho (DOT) org]
    > On Behalf Of Matt Campbell
    > Sent: Monday, April 19, 2010 6:03 PM
    > To: jhyde (AT) pentaho (DOT) com; Mondrian developer mailing list
    > Subject: [Mondrian] Re: NativizeSetFunDefTest
    >
    > We'll look into it and let you know.
    >
    >
    > On 4/18/10, Julian Hyde <jhyde (AT) pentaho (DOT) com> wrote:
    > > Matt,
    > >
    > > I am investigating 2 errors and 1 failure from NativeSetFunDefTest

    > that
    > > appear when aggregates tables are enabled
    > > (mondrian.rolap.aggregates.Use=true and
    > > mondrian.rolap.aggregates.Read=true). The exceptions occur on all

    > databases
    > > (at least, oracle, mysql and derby).
    > >
    > > The exceptions were introduced by your change 13256 on

    > //open/mondrian
    > > branch in December, and that branch and the mondrian-3.2

    > branch still
    > fail
    > > with the same exceptions. Can you investigate please? Code

    > freeze for
    > 3.2.0
    > > is this week and it would be great if we can get the suite running

    > 100%
    > > clean for aggregates by then.
    > >
    > > Julian
    > >

    > _______________________________________________
    > Mondrian mailing list
    > Mondrian (AT) pentaho (DOT) org
    > http://lists.pentaho.org/mailman/listinfo/mondrian
    >
    >



    _______________________________________________
    Mondrian mailing list
    Mondrian (AT) pentaho (DOT) org
    http://lists.pentaho.org/mailman/listinfo/mondrian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Privacy Policy | Legal Notices | Safe Harbor Privacy Policy

Copyright © 2005 - 2019 Hitachi Vantara Corporation. All Rights Reserved.